Rust Converter Primer

Article Number: 26060

Application: Car repair / Protective coating

Product Description

Rust Converter Primer is a highly effective primer for metal surfaces that converts rust into a stable protective layer and prepares it for further painting. Ideal for use in car repairs, this primer provides optimal corrosion protection and ensures long-lasting durability.

Features:

• Converts rust into a stable layer
• Excellent adhesion on metal
• Suitable as a base for all common car paints
• Quick-drying, even surface

Application Instructions

1. Clean the surface, removing loose rust particles and dirt.
2. Shake the can well.
3. Spray evenly from a distance of 20–30 cm.
4. Allow to dry: approximately 20–30 minutes at room temperature.
5. Apply a second coat if necessary.
6. After complete drying, the surface can be overpainted with car paint.

Note: Apply only on dry metal surfaces. Do not use on plastic or rubber.

Safety Instructions

Hazards and Precautions:

- Extremely flammable: Aerosol under pressure. Protect from heat, sparks, and open flames.
- Eye irritation: In case of eye contact, rinse immediately with plenty of water for several minutes.
- Possible skin allergies: Wear protective gloves.
- Avoid inhalation of fumes: Ensure adequate ventilation.
- Storage: Store in a cool, dry place below 50°C, protect from sunlight, keep out of reach of children.
- Disposal: Dispose of contents/container according to local regulations.

Hazardous substances contained: Acetone, Isopropanol, Methyl Ethyl Ketone, Dimethyl Ether, Xylene, Epoxy resin (Bisphenol-A), and other solvents.